Color steel tile roof photovoltaic power station installation solution
Release Time: 2020-01--13
With the rapid development of distributed photovoltaics in China, the roof is the main carrier for installing photovoltaic power plants. For ordinary people, the advantage is that they can use roof construction to build photovoltaic power plants, and the construction period is short. But there is a big disadvantage is that the amount of power generation is closely related to the climatic conditions and the roof environment.
So what kind of photovoltaic installation is suitable for roofing of color steel tiles? With years of practical experience in production, we summarized the following elements to be considered and practical solutions! First of all, we need to consider a few elements. Whether the service life of color steel tiles can reach the minimum life required by photovoltaic power plants.
Whether the load on the roof can reach the standard requirements of distributed photovoltaic power plants. Requirements for roof waterproofing after installation of photovoltaics. Regarding the difference in the orientation of the roof, the planning of the photovoltaic mounting system matrix. The solution is as follows. Color steel tiles are generally replaced every 10-15 years. Therefore, the demand for color steel tiles with long service life is discussed with the owner for replacement.
The roof is required to bear under the condition of full paving of components: 0.15KN/㎡. Buildings that do not meet this goal require reinforcement. If the owner has higher requirements for roof waterproofing, or the roof is more stale, it is necessary to do waterproof and anti-corrosion treatment on the roof before installation. Under the condition that the roof is not sunny, the support matrix needs to be planned properly, so as to ensure high power generation.